EMT Practice Test

1. Question Content...

---

Question1: A customer needs to upgrade their existing HPE 3PAR environment. They ask you to present a solution to gather data from all 200 of their HPE 3PARs arrays, which are spread across the globe. The arrays consist of various generations and OS levels, and they are managed by regional instances of SSMC. What should you present to the customer as a solution?

Question2: A customer wants an HPE 3PAR array with about 400,000 IOPS and over 6000 MBs per second through - put at 16K block size. What should you consider in your design?

Question3: Two companies merged . The IT department needs a temporary solution to communicate between the two companies' SAN Infrastructure until they can redesign and merge the two fabrics together.
Both companies have B-Series switches that are capable of using Fibre Channel to Fiber Channel routing.
Which zoning option will meet the customer's needs?

Question4: A customer needs to replicate multiple HPE 3PAR source arrays to a single HPE 3PAR target array at a Disaster Recovery sue.
What is required to support a 31 fan-in for Remote Copy?

Question5: A customer has three 4-node HPE 3PAR arrays. Two of the arrays are deployed at a primary site, and the third array is deployed at a disaster recovery site. Both arrays at the primary site are replicated to the single array at the disaster recovery site.
All replication is asynchronous periodic. All arrays are utilizing 4 RCIP links for replication.
The customer needs to add a third array at the primary site. They would like to use the existing array at the disaster recovery site as a replication target for this additional array.
What must the architect consider to meet this customer requirement?

Question6: A customer attempts to test HPE 3PAR Peer Persistence automated failover by disconnecting the Quorum Witness (QW) link at the source 3PAR. then disconnecting the Remote Copy <RC) link at the source 3PAR one minute later However, failover does not occur What should you do differently to test Peer Persistence automated failover?

Question7: A customer is monitoring an existing HPE 3PAR array, which is doing synchronous replication to a remote site. The customer notices that controller utilization regularly exceeds 60% on all nodes. An HPE 3AR OS upgrade to 3.3.1 MU2 is planned in the near future to support compression on the array.
What should you inform the customer before performing the upgrade?

Question8: A customer wants to implement a disaster recovery plan for their current HPE 3PAR array datA. They have obtained a remote site 10km away their primary site. They have performed bandwidth testing, and have confirmed their RTT is approximately 100ms. The customer needs to provide data replication to assure the best data availability they can achieve. Which synchronization method meets their needs?

Question9: A customer wants to replace an EMC storage array. You want to provide as much Information about the EMC configuration as possible to propose an HPE 3PAR or HPE Nimble Storage array.
Which HPE tool will meet your needs?

Question10: A customer has a requirement to provide disaster recovery for an application. The application has an RPO of
30 mins, with an RTO of 15 mins. How can HPE 3PAR Remote Copy help meet the customer's specified requirements in the most cost effective manner?

Question11: Match the HPE resource to Its source location.

Question12: A customer has a solution from another vendor. The customer ran into issues of a disproportionally high failure rate of media keeping logfile datA. The issue also appeared in the second array, to which the data is being replicated.
The customer specifically asks you for a solution that will not have this same issue. Which feature of HPE
3PAR arrays should you emphasize?

Question13: A customer has two devices in separate fabrics that need to communicate on a regular basis. The customer does not want to merge these HPE B-series switch fabrics together due to security reasons.
What type of zoning should you recommend that will not merge the two fabrics, but will allow those devices to communicate?

Question14: A customer wants to create a single Nimble Storage SAN that provides both a Production primary storage area and a Test/Dev storage area that win allow application volumes from the Test/Dev area to be migrated to the Production area without disruption What should you recommend''

Question15: Refer to the exhibit.

A customer has the environment shown. They currently perform application-consistent daily full backups via Veeam backup to an HPE StoreOnce device. These backups are then replicated to an alternate device using Catalyst copy.
Changing business requirements have mandated the RPO and RTO for the customer's SQL databases be reduced to 15 minutes. Due to the size of the databases, it is not possible to meet this requirement with their existing backout application.
What should you recommend the customer implement in order to meet their new requirement?

Question16: You want to use FCAP authentication in an environment with FOS 7.3 running switches with no extra licenses.
What should you do to use this feature?

Question17: A customer recently acquired another company located less than three km from their current main location.
Both locations use HPE D-Series products in their storage environments.
The customer needs to merge the two locations while still using the current WAN and networking infrastructure at both locations. They need to Keep the initial cost down until they are able to redesign both networking infrastructures When providing a proposal, which protocol should be incorporated to meet the customer needs?

Question18: A customer needs to replace their outdated storage arrays.
Which resource provides the necessary information to properly size a solution?

Question19: For customers, what are the benefits of developing a company compliance policy? (Select two.)

Question20: A customer has two sites. The link between sites is Fibre Channel, and the distance between sites is less than
1km. The link latencies are within HPE recommended tolerances.
The customer asks you to design a Peer Persistent solution using HPE servers running physical Windows
2016 servers and HPE 3PAR storage.
What are characteristics of the Quorum Witness? (Select two.)

Question21: How does the HPE Nimble Storage product strategy support a customer's investment protection requirements for today and the future?

Question22: A customer needs to new storage solution, including replication. The replication solution does not need to provide an RTO or RPO of zero.
The customer suffers from severe VM sprawl and has experienced unidentified storage service-level degradations.
What should you point out during your presentation of the solution?

Question23: A customer needs lo replace an existing Dell EMC backup-to-disk solution with an HPE solution to integrate with an HPE 3PAR solution.
Which toot should you use lo begin your assessment of the customer environment?

Question24: A customer configured the RCIP ports on two HPE 3PAR arrays, and cabled them to the respective networks.
The remote copy links between the arrays are established, and the remote copy service Is started successfully.
The customer wants to ensure they have a latency lower than 5 ms and can support a throughput of 8 Gb/s.
What should you do to verify the links are correctly sized to support the replication bandwidth required?

Question25: Which advantage does InfoSight for HPE Storage deliver to a customer?

Question26: What is one of the advantages of protecting HPE 3PAR File Persona with RMC?

Question27: A customer has two HPE Nimble arrays that are replication partners. The customer suffers a complete outage on the source array. What does the administrator need to do to make the most recent snapshot available?

Question28: How does the HPE Storage strategy support the business need for intelligent storage?

Question29: You are discussing a HPE 3PAR Remote Copy solution with your customer. The customer has had a bad experience in their current non-HPE replication solution. Currently the source and target volume properties on the array must be identical on both sides and cannot be changed without re-creating the volumes.
What should you explain to the customer?

Question30: A customer needs to a multi-site environment where the entire inter-site transmission will be encrypted. Which products support this feature without additional licenses? (Select two.)

Question31: A customer is interested in using HPE InfoSight Cross-stack Analytics for VMware.
Where does the customer need to make the appropriate configuration changes to makes this active?

Question32: A customer requires an all-flash solution that will scale out, with multiple arrays for replication. The customer also needs the solution to provide more data per terabyte of flash storage than competing solutions.
Which HPE program should you leverage in your solution to help meet the customer's requirements?

Question33: A customer has two HPE 3PAR arrays which are using Remote Copy and AO. The customer notices a large portion of the data is residing in the NL tier of the secondary array, while all tiers are utilized evenly on the primary array. Which statement about the secondary array behavior is true?

Question34: A customer needs a data recovery solution for their HPE 3PAR array. They have the following requirements:
* RPO needs to be within three hours
* RTO needs to be within three hours
* There is no need for offsite data archive
* They will have a limited maintenance window
Which solution meets all of the customer needs?